Wannabe Undie

Whoahhh… Long time no see everyone! First of all, I want to say hi, ” HIIIIIIIIIIIIIIIII”, second, I want to say I am doing a blog! Now say, WHOOOOTTT! :)

I wanna start off by saying, yummy. Why? because, we’re doing Yummy Panties. lol. You’ll know what I mean. All you need for this project are boys button up shirt, panties that you don’t use and stretchy garter. Oh and sewing stuff.

Turn your boyfriend’s button up shirt into something that your boyfriend would like. So, turn it into something useful, really useful. This project is not hard! It’s just a lot of tearing apart. Now, bring out those “undahhwaah” (under wear).

At the end of your underwear, you’re gonna have to rip the seam to get the stretchy garter out of it. Use this:

to get this result:

On the button up shirt, lay out the under wear just like the picture and pin the underwear on the top part of the button up.

Once you lay it we start pinning!

Pin the underwear all around so when you cut it, it won’t go wrong on you and you’ll have nice cut clean garments. But before all the cutting part happens, put dots on where you’re going to cut it and leave probably half an inch for seams:

so it will look like this after all the cutting and hemming the sides:

Now for the complicated part, putting the stretchy garments on to the under wear.

1. lay the garment on the foot of the sewing machine.

1.5. If you’re not using a sewing machine, just follow the next steps.

2. feed the sewing machine the garment + the stretchy garter, BUT DON’T FEED IT ALL THE WAY. Feed only centimeter of it just to lock and secure the garment.

3. Now, while sewing the garment + garter, just relax the GARMENT, while sewing, pull the GARTER gently. So that when you’re done with the sewing, it will look like “shrink” on the lining.

4. When you let go, it will look shrink/gathered. The last step is sew the ends of the garment to look like an under wear, and it should look like this.

front/back